BEAMSENSE Co., Ltd.
High-accuracy analysis of resin structure by high-definition X-ray fluoroscopy by new nano-focus X-ray photography method
- Technical Classification:
- Products:
- [ Equipment / Facilities ]
- Keyword:
- [ 3D-CT ] [ fiber orientation ] [ Nondestructive testing technique ]
Point of the Proposed Technology
- The internal structure inspection function will be improved greatly by the small nano-focus X-ray CT equipment in place of the conventional electron microscopy.
- Because the cutting, machining, polishing, and vapor deposition processes are not necessary, the environmental load and the burden of the operator will be reduced greatly.
- By nano-focus X-ray tomography (CT), not only the surface but also the inside nano level 3D structure can be observed and analyzed.
- Because the cutting, machining, polishing, and vapor deposition processes are not necessary, the environmental load and the burden of the operator will be reduced greatly.
- By nano-focus X-ray tomography (CT), not only the surface but also the inside nano level 3D structure can be observed and analyzed.
Effect(s)
Equipment cost: Reduction of about 50% compared to conventional method
Spatial resolution: 0.2 μm by maximum magnification
Equipment installation area: 1/4 compared to conventional method
Spatial resolution: 0.2 μm by maximum magnification
Equipment installation area: 1/4 compared to conventional method
New Technology
Technology Deployment and Cooperation
| Development Stage |
Commercialization Completed (already delivered: no) |
||||
|---|---|---|---|---|---|
| Intellectual Property Right | Yes | ||||
| Joint Researchers (their role) | National Institute of Advanced Industrial Science and Technology (Role: Reconfiguration of 3D image from stereo X-ray image)
Kyoto Institute of Technology (Role: Research, development, and evaluation on 3D X-ray CT software) Iwate Prefectural University (Role: Measurement of 3D CT image, and research on information processing technology) |
||||
| Example of Application | - Inspection of resin parts of automobiles
- Inspection of small parts of various electronic equipment | ||||
| Technical Problems | - Because the nano-focus X-ray generator is expensive, the system will be expensive. If the cost is improved, the adoption to plants will be expanded.
- Because the X-ray output of the nano-focus X-ray generator is weak, the photography takes time. The sensitivity of the X-ray CCD should be improved to shorten the photographing time. - The validation service at our company will be promoted continuously until the nano-focus X-ray generator is improved. | ||||
| Collaborator needed to Improve | - 3D-CAD related companies with knowledge of 3DCT image processing technology
- Research institutes such as universities, etc. with 3DCT evaluation technology and equipment | ||||
| Technical WEB page | https://beamsense.co.jp/?page_id=2 | ||||
Inquiries
| Personnel / Department | / President, Sueki Baba | ||||
|---|---|---|---|---|---|
| Address | 2-19-16, Izumi-cho, Suita-City, Osaka, 564-0041, Japan | ||||
| Contact |
TEL: +81-6-6384-9563 |
||||
Outline of Company and Organization
| Location | 2-19-16, Izumi-cho, Suita-City, Osaka, 564-0041, Japan | ||||
|---|---|---|---|---|---|
| Contact | TEL: +81-6-6384-9563 | ||||
| Capital / No. of Employees | 10,000,000 yen・5 employees | ||||
| Product Line | Industrial X-ray fluoroscope | ||||
| Major Customers | Panasonic Corporation | ||||
| Overseas Base(s) | Agents in China, Taiwan, Thailand, and Malaysia | ||||
| Certification | None | ||||
| Company/Organization WEB page | http://beamsense.co.jp/ | ||||
Update date: 2020/3/6