Suncorona Oda Co., Ltd.
Isotropic CFRTP Stampable Sheet (CF / Thermoplastic Resin)
- Technical Classification:
- [ Intermediate Products ]
- Products:
- [ Products / Processed Products ]
- Keyword:
- [ carbon fiber ] [ Isotropic Stampable Sheet ] [ molding ] [ Thermoplastic resin ]
Point of the Proposed Technology
I. Materials with isotropy and high strength (mechanical properties)
II. High moldability enables to produce intricate-shaped moldings.
III. Short-cycle forming and low-pressure pressing are possible.
IV. A low porosity rate ensures high quality moldings.
V. Suitable for thin CFRP products
II. High moldability enables to produce intricate-shaped moldings.
III. Short-cycle forming and low-pressure pressing are possible.
IV. A low porosity rate ensures high quality moldings.
V. Suitable for thin CFRP products
Effect(s)
Total cost is reduced by shortening the forming time and simplifying the material handling.
Mass: 1/4 of iron or steel
Productivity/workability: high-cycle forming
Superior to conventional fabrics in formativeness in deep grooves and small corner radius
Mass: 1/4 of iron or steel
Productivity/workability: high-cycle forming
Superior to conventional fabrics in formativeness in deep grooves and small corner radius
Conventional Technology
New Technology
Technology Deployment and Cooperation
| Development Stage |
Commercialization Completed (already delivered: no) |
||||
|---|---|---|---|---|---|
| Intellectual Property Right | Yes | ||||
| Joint Researchers (their role) | Kanazawa Institute of Technology (continuous molding technology)
Industrial Research Institute of Ishikawa (after-processing technology, evaluation of molding products) |
||||
| Example of Application | Metallic parts, thermosetting resin parts. Fabric-made parts that are Difficult to form.
Automotive parts, sports goods. | ||||
| Technical Problems | [Challenge] Developing a cold-pressing molding method and heat-and-cool molding method.
[How to respond] We'll evaluate in collaboration with Kanazawa Institute of Technology and molding processing manufacturer. (Heat&Cool, Stamping forming method) | ||||
| Collaborator needed to Improve | Company that has a molding technology for carbon fiber composites and creates a new market by conducting molding as the end customer
| ||||
| Technical WEB page | http://www.sunoda.co.jp/product/new.html | ||||
Inquiries
| Personnel / Department | New Business Development Department / Director, Soichiro Oda | ||||
|---|---|---|---|---|---|
| Address | Ka-81, Kiba-machi, Komatsu-shi, Ishikawa, 923-0311, Japan | ||||
| Contact |
TEL: +81-761-43-2268 FAX: +81-761-43-1762 |
||||
Outline of Company and Organization
| Location | Ka-81, Kiba-machi, Komatsu-shi, Ishikawa, 923-0311, Japan | ||||
|---|---|---|---|---|---|
| Contact | TEL: +81-761-43-2211 FAX: +81-761-43-1762 | ||||
| Capital / No. of Employees | 33,730,000 yen・167 employees | ||||
| Product Line | Manufactured fiber products | ||||
| Major Customers | Teijin, Toray, NITORI | ||||
| Overseas Base(s) | China, Vietnam | ||||
| Certification | ISO 9001：2008、 JIS Q9001：2008 | ||||
| Company/Organization WEB page | http://www.sunoda.co.jp | ||||
Update date: 2020/2/12